FAQs
.avif)
Frequently asked questions
General
What does Resin Floors Telford do?
We install resin flooring systems for industrial, commercial and domestic spaces. Our services include epoxy and polyurethane resin floors, cementitious screeds, resin-bound driveways and paths, fast-curing MMA resin systems, MOT workshop demarcation, and permanent pothole repairs.
Where are you based and who do you work for?
We're based at Unit 22–25, Tweedale Industrial Estate, Madeley, Telford, Shropshire, TF7 4JZ, and carry out projects nationwide.
How do I get a quote?
Use the contact form at resinfloorstelford.co.uk/contact, email info@resinfloorstelford.co.uk, or call 01952 878615. For pothole repairs, you can send your location and photos of the potholes for a free, no-obligation quote.
Do you work on industrial floors, commercial kitchens and homes?
Yes. We cover industrial and commercial floors, hygienic floors for food and drink premises, and decorative resin-bound systems for outdoor spaces.
How many projects have you completed?
We have completed more than 1,105 projects and covered 474,880 m² of floors.
Which accreditations do you hold?
We hold accreditations with FeRFA, CHAS, SafeContractor, the Shropshire Chamber of Commerce and Resdev, among others.
Epoxy resin floors
What is an epoxy resin floor?
An epoxy resin floor is a seamless coating or screed applied to concrete using two-part epoxy resin chemistry. It creates a durable, chemical-resistant surface that is easy to clean. We offer a complete range, including 500-micron coatings, self-levelling systems and heavy-duty epoxy screeds.
What's the difference between an epoxy coating, a self-levelling floor and an epoxy screed?
A high-build coating is about 500 microns thick (two coats) and suits light to medium warehouse traffic. A self-levelling system is laid at 1–5mm, which smooths minor undulations in the concrete and gives a high-gloss finish. An epoxy screed is filled with mineral sands for the heaviest impact and abrasion, and can be hand-trowelled to form ramps, coving and falls to drains.
Are epoxy floors slip-resistant?
Yes. Epoxy floors can be finished in low-slip options to suit the environment.
Can epoxy be used for line marking and hazard zones?
Yes. Epoxy is available in a wide range of RAL colours, so it works well for lines, walkways, and marking out areas and hazards.
Polyurethane resin floors
What is polyurethane resin flooring and when should I choose it over epoxy?
Polyurethane is a softer, more flexible resin, but equally as tough depending on the system. It has a D-30 to D-50 hardness rating, which gives more underfoot comfort and resistance to cracking. Choose it for light to medium traffic, and for healthcare, food and pharmaceutical premises where high-temperature cleaning is needed.
Is polyurethane UV-stable?
Yes. Our polyurethane systems can be suitable for both indoor and external commercial environments, and the screeds resist fading in sunlight.
Can polyurethane floors be steam-cleaned?
Yes. Polyurethane is resistant to steam, and coved edges help prevent bacteria building up in corners and joints.
What finishes are available?
Polyurethane comes in a range of looks, including concrete-effect, colour-mixed and decorative flake finishes. The systems suit retail, office and domestic spaces as well as industrial ones.
Cementitious screeds
What is a cementitious screed and when do I need one?
A cementitious screed is a pumped, heavy-duty floor base that replaces a damaged or uneven surface. It provides a level, durable base for a resin floor finish. It's a good option for worn floors in industrial sites, commercial kitchens and warehouses.
Can a screed go on top of an old, damaged floor?
This depends on the existing floor. If it is suitable, our team prepares and primes the existing floor, then applies the pumped screed at the required depth. The result is a smooth base that can take a resin finish.
How quickly does a screed dry?
Screeds typically dry within 24 hours, although a full chemical cure takes longer.
Resin-bound driveways and paths
What is resin-bound surfacing?
Resin-bound surfacing is a decorative system made from quartz aggregate mixed with resin. It's hand-trowelled to a thickness of 15–40mm, which creates a seamless, hard-wearing surface for driveways, patios and paths.
Is resin-bound surfacing permeable?
Yes. When laid on a permeable base, the surface drains fully and meets SuDS guidelines, which reduces surface water build-up. The system can also follow the contours of a ramped area.
Will resin-bound surfacing fade in the sun?
No. It can be formulated to be UV-stable, so it stays the same colour when exposed to ultraviolet light. Regular brushing and washing is all the maintenance it needs.
Can a resin-bound surface be made in a custom design?
Yes. The quartz aggregate can be blended and designed to suit the property, so each system can be made to order.
MMA resin systems
What is MMA resin flooring and why is it fast?
MMA (methyl methacrylate) is a fast-curing resin. We can install it with a curing time of as little as 2 hours, so businesses lose minimal time. It also cures at temperatures as low as -30°C.
When should I choose MMA instead of epoxy or polyurethane?
Choose MMA when downtime must be kept to a minimum, for example in busy warehouses, workshops or loading bays. It also suits areas that need a quick repair or a fast-curing demarcation.
What finishes can MMA be supplied in?
MMA is available as a decorative flake system, a quartz screed for slip resistance and durability, and a self-levelling "Freeflow" system in a range of colours.
MOT workshop demarcation
Is your demarcation compliant with DVSA requirements?
Yes. Our demarcations conform to DVSA requirements, and we can help your workshop meet the standards inspectors look for.
Why use resin markings instead of hazard tape?
Resin yellow and black markings are sharper and last longer than hazard tape, which can lift or wear on a dirty floor. A resin demarcation combined with a full resin floor is also easy to wipe and stays free from oil deposits.
Which types of workshop do you cover?
We have experience with HGV, LGV and domestic vehicle workshops. Demarcation helps keep staff safe around pits, brake testers and lifts.
Permanent pothole repairs
How do your pothole repairs work?
We use fast-curing MMA resin to fill potholes permanently. The repair takes under 30 minutes to cure and needs no hot works, cutting or heavy equipment, so it's quiet and causes minimal disruption on site.
Do you offer a guarantee on pothole repairs?
Yes. Our repairs are guaranteed for 5 years against debonding.
Are your pothole repairs approved for highway use?
Yes. Our MMA technology is HAPAS approved for repairs on highways, high-traffic loading bays and car parks.
How much MMA does one repair need?
One pack covers 1m² at 11mm depth, enough for most potholes. Larger repairs use multiple packs combined.
How much does a pothole repair cost?
Our current rate is £120 per pothole unit (1m² at 11mm depth). All rates are location and project dependent, so please get in touch with your location and photos for a quote.
Are MMA repairs cheaper than asphalt over time?
MMA is a permanent repair, so it doesn't need to be redone each winter the way many asphalt patches do. This can reduce the total cost over time, although the upfront cost of a repair is higher than asphalt.
